 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20401 rev. A 03/02 80CPQ150 SCHOTTKY RECTIFIER 80 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @ 40 Apk, TJ=125C (per leg) Description/ Features The 80CPQ150 center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175 C TJ operation Center tap TO-247 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 80CPQ150 Units 80 150 1930 0.71 A V A V - 55 to 175 C Case Styles 80CPQ150 Base Common Cathode 2 1 3 2 Anode 1 Anode 2 Common Cathode TO-247AC www.irf.com 1 80CPQ150 Bulletin PD-20401 rev. A 03/02 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 80CPQ150 150 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 Per Device Per Leg 80CPQ Units 80 40 1930 500 0.5 1.0 A mJ A A Conditions 50% duty cycle @ TC = 150C, rectangular wave form 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) TJ = 25 C, IAS = 1.0 Amps, L = 1 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Typ. 0.82 0.97 0.67 0.80 Max. Units 0.86 1.09 0.71 0.85 200 26 1100 7.5 10000 V V V V A mA pF nH V/ s Conditions @ 40A @ 80A @ 40A @ 80A TJ = 25 C TJ = 125 C @ 25C TJ = 25 C TJ = 125 C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) * See Fig. 2 Typical Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) 10 12 - VR = 5VDC (test signal range 100kHz to 1Mhz) Measured lead to lead 5mm from package body (Rated VR) dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 80CPQ Units -55 to 175 -55 to 175 0.6 0.3 0.24 6 (0.21) Min. Max. 6 (5) 12 (10) C C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style C/W DC operation C/W DC operation * See Fig. 4 C/W Mounting surface , smooth and greased g (oz.) Kg-cm (Ibf-in) TO-247AC(TO-3P) JEDEC 2 www.irf.com 80CPQ150 Bulletin PD-20401 rev. A 03/02 1000 1000 Tj = 175C Reverse Current - IR (mA) 100 10 1 0.1 0.01 150C 125C 100C 75C 50C 25C Instantaneous Forward Current - I F (A) 100 Tj = 175C Tj = 125C Tj = 25C 0.001 0 20 40 60 80 100 120 140 160 Reverse Voltage - V R (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 T = 25C 10 Junction Capacitance - CT (pF) J 1 0 0.5 1 1.5 2 2.5 3 Forward Voltage Drop - V FM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 100 0 20 40 60 80 100 120 140 160 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 1 Thermal Impedance Z thJC (C/W) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 P DM 0.1 t 1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x Z thJC + Tc 0.01 0.00001 0.0001 0.001 0.01 t1 , Rectangular Pulse Duration (Seconds) 0.1 1 Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 80CPQ150 Bulletin PD-20401 rev. A 03/02 180 Allowable Case temperature (C) 50 Average Power Loss (Watts) 170 DC 40 30 160 150 140 Square wave (D = 0.50) 80% Rated Vr applied D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC RMS Limit 20 10 0 0 10 20 30 40 50 60 Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 130 120 0 see note (2) 10 20 30 40 50 60 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) 10000 At Any Rated Load Condition And With rated Vrrm Applied Following Surge 1000 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L H IG H -SPE ED SW ITC H FREE-W HE EL D IO D E 40H FL40S02 V d = 25 V olt D UT IRFP460 Rg = 25 ohm + C UR RE N T M O N ITO R Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 80CPQ150 Bulletin PD-20401 rev. A 03/02 Outline Table 3. 65 (0 .14 4) 3. 55 (0 .13 9) 15 .90 (0 .626 ) 15 .30 (0 .602 ) DIA. 5. 30 (0 .20 9) 4.70 ( 0.185) 2.5 ( 0.098) 1.5 ( 0.059) 5. 70 (0 .22 5) 5.30 ( 0.208) 20 .30 (0 .800 ) 19 .70 (0 .775 ) 5.50 ( 0.217) 4. 50 (0 .17 7) 1 2 3 (2 PLCS.) Base Common Cathode 2 1 3 2 Anode Anode 2 14. 80 ( 0.583) 14 .20 (0 .559 ) 1 4. 30 (0 .17 0) 3. 70 (0 .14 5) 2. 20 (0 .08 7) Common Cathode 1. 40 (0 .05 6) 2. 40 (0 .09 5) MAX. 0.80 ( 0.032) 0. 40 (0 .21 3) MAX. 1. 00 (0 .03 9) 10. 94 ( 0.430) 10 .86 (0 .427 ) Conform to JEDEC outline TO-247AC (TO-3P) Dimensions in millimeters and (inches) Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/02 www.irf.com 5 |
Price & Availability of 80CPQ150
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |